Installing and starting output server 2, Installing output server 2 on a new playout server, Guidelines for upgrading to output server 2 – Grass Valley iTX Output Server 2 v.2.5 User Manual

Page 13: 3 installing and starting output server 2

Advertising
background image

9

Installing and Starting Output Server 2

This chapter discusses how to install or upgrade the Output Server 2 service and related
components and how to start these services from Server Controller.

For detailed information on setting up an iTX system, refer to the iTX System Administration
Guide
.

Summary

Installing Output Server 2 on a New Playout Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Upgrading an Output Server 1 System to Output Server 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Starting Output Server 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Installing Output Server 2 on a New Playout Server

To install Output Server 2 on a new playout server:

1 Access and open the iTX Installer.

2 Right-click the Setup.exe file and select Run as administrator. The iTX Select Software

to Install window appears.

3 Expand the Playout section

4 Check Output Server 2.

5 Continue the installation as described in the iTX System Administrator Guide. This

includes:

• Creating a Media Cache folder on the playout server.

• Adding channels via TXPlay 2’s iTX Channel Config dialog.

6 Apply any additional configuration that is required for your playout server.

See

Setting Up Output Server 2

on page 15 for more information.

Upgrading an Output Server 1 System to Output Server 2

If you are upgrading from an Output Server 1 system to Output Server 2, there are
additional precautions and procedures to take into consideration compared to a new
installation. This includes how best to transition from one system to the other and how to
operate with a mix of video engines during the transition.

Guidelines for Upgrading to Output Server 2

During the transition from Output Server 1 to Output Server 2, it may be necessary to
temporarily operate with some channels on Output Server 2 and some still on Output
Server 1. This is known as a mixed Output Server system.

Advertising