Grass Valley K2 Storage System Instruction Manual v.3.1 - Manual (Page 167)

September 6, 2006 K2 Storage System Instruction Manual 167
Sending K2 configuration to NetCentral
In addition, NetCentral automatically changes its view of the K2 Storage System
whenever you use the K2 System Configuration application to do one of the
following:
• Remove a K2 Storage System
• Rename a K2 Storage System
• Add a device to a K2 Storage System
• Remove a device from a K2 Storage System
Refer to the NetCentral User Guide to set up the NetCentral system. After installing
a device provider, you can find additional documentation about monitoring that type
of device on the NetCentral Help menu.