Safety, Operator safety, Failure to inspect before operating – Polaris 2014 BRUTUS Owner's Manual User Manual
Page 17: Operating with a load on the vehicle
15
SAFETY
Operator Safety
Failure to Inspect Before Operating
Failure to inspect and verify that the vehicle is in safe operating condition before operating increases
the risk of an accident. Always perform the pre-ride inspection before each use of your vehicle to make
sure it's in safe operating condition. See page 33.
Always follow all inspection and maintenance procedures and schedules described in this owner's
manual. See page 73.
Operating With a Load on the Vehicle
The weight of both cargo and passengers impacts vehicle operation. For your safety and the safety of
others, carefully consider how your vehicle is loaded and how to safely operate the vehicle. Follow the
instructions in this manual for loading, tire pressure, gear selection and speed.
• Do not exceed vehicle weight capacities. The vehicle’s maximum weight capacity is listed in the
specifications section of this manual and on a label on the vehicle. When more passenger weight is
added, cargo weight may need to be reduced accordingly.
• The recommended tire pressures are listed in the specifications section of this manual and on a
label on the vehicle.
Always follow these guidelines:
Under ANY of these conditions:
Do ALL of these steps:
Passenger and/or cargo exceeds half the maximum
weight capacity
1. Slow down.
2. Verify tire pressure.
3. Use extra caution when operating.
Operating in rough terrain
Operating over obstacles
Climbing an incline
Towing
Operating with attachments installed