Polaris 2014 BRUTUS Owner's Manual - Manual (Page 61)

59
OPERATION
Filling And Emptying The Bucket
Filling
1. Lower the attachment arm all the way (A) and
tilt the bucket forward (D) until the cutting edge
is on the ground.
2. Drive slowly forward to push the bucket
slightly into the material.
3. Raise the attachment arm (B) and tilt the bucket
backward (C).
WARNING! Load, unload and turn on flat level ground.
Do not exceed vehicle load capacity shown on sign
(decal) in cargo box. Failure to obey warnings can cause
vehicle rollover and can cause serious injury or death.
4. Drive backward away from the material.
Emptying
1. Keep the bucket low when moving to the area
where you want to dump the material.
2. Move the machine slowly to the dump area
3. While raising the attachment arm (B), tilt the
bucket forward (D) to keep it level and help
prevent material from falling off the back of the
bucket.
4. Tilt the bucket all the way forward (D) to empty
the bucket.
A
B
C D
A
B
C D
A
B
C D