Polaris 2014 BRUTUS Owner's Manual - Manual (Page 29)

27
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
3. MPH / KM/H Display - MPH is displayed when the instrument cluster is in the
Standard mode. KM/H is displayed when the instrument cluster is in the Metric mode.
4. High Beam Indicator - LED icon illuminates whenever the Headlamp switch is in the
high beam position.
5. Fuel Level Indicator - LCD bar graph indicating current fuel level. All segments will
flash when the last segment is cleared indicating a low fuel warning.
6. Clock / PTO RPM - Displays current time in either 12-hour or 24-hour formats. When
the PTO is engaged, PTO RPM will be indicated instead of the clock.
7. Engine / Hydraulic Fluid Temperature Indicator - LED icon illuminates when the
ECM determines the engine is overheating. The indicators will initially flash to indicate
the engine is overheating. The indicators will stay lit and not flash if a severe
overheating condition exists.
8. PTO Indicator - PTO is engaged when this is illuminated. PTO RPM will be displayed
in the Clock field (6) ONLY when engine RPM is displayed in the Information Display
Area (2).
9. Check Engine MIL - Illuminated when the ECM has detected a Diagnostic Trouble
Code in the engine management system.
10. Unit Lock - N/A on this model.
11. Hour Meter - Illuminates when the display (2) is showing hours.
12. Low Oil Pressure Indicator - LED icon illuminates low engine oil or hydraulic fluid
pressure is sensed.
13. Gear Position Indicator - Displays gear selector position.
H = High
L = Low
N = Neutral
P = Park
-- = Gear Signal Error (shifter stuck between gears)
14. Power Steering System MIL - N/A on this model.
15. Glow Plug Indicator - Illuminated when the glow plugs are active. Light goes out when
the engine is ready to start.
16. Seat Belt Indicator - LED icon illuminates for 10 seconds when the key is turned to the
ON position. The lamp is a reminder to the operator to ensure all riders are wearing seat
belts before operating the vehicle.
17. AWD/TURF Indicator - Illuminate to indicate how many drive wheels are active. This
will tell you if you are in AWD, 2WD, or Turf.
18. ADC Indicator - N/A on this model.
19. Service Interval Indicator - Preset at the factory and adjustable by the user, a flashing
wrench symbol alerts the operator that the preset service interval has been reached and
maintenance should be performed. The wrench icon will flash for 10 seconds upon start-
up once it reaches 0.
20. Unit of Measurement - Indicates the measurement (Trip 1, Trip 2, KM, MI, RPM)
being displayed in the Information Display Area (2).