Features and controls, Center console (for models hd and hd, Only) – Polaris 2014 BRUTUS Owner's Manual User Manual

Page 25

Advertising
background image

23

FEATURES AND CONTROLS

Center Console (For Models HD
and HD

PTO

Only)

Joystick - Attachment Arm

Movement of the joystick controls the lift and tilt

functions of the attachment arm and the PRO-TACH

attachment system. See page 42.

Engine Speed (RPM) Control Lever

The engine speed (RPM) control lever controls

engine RPM. This is used to set engine RPM

separately from the travel speed when using

attachments. See page 45.

Power Take-Off (PTO)

The front PTO is available on model HDPTO only.

The PTO has a rated speed of 2000 RPM. The PTO is

used to power some attachments. See page 63.

WARNING! Do NOT exceed the rated attachment PTO
speed. Stay clear of rotating driveline. Keep bystanders
away. Keep PTO shields and all guards in place.
Disengage PTO, put the gear selector in PARK, stop the
engine and make sure all rotating components are stopped before exiting utility vehicle. Do NOT
service the utility vehicle or attachment with the PTO engaged. Do NOT service the attachment in a
raised position unless properly blocked and with all rotating components stopped. Disengage PTO for
road travel.

Joystick Lockout Switch

The joystick lockout switch is used to activate or lock out the joystick functions. The joystick

should be locked when no attachments are installed. This will keep the joystick from

accidentally being activated. See page 42.

Tilt Lockout Switch

The tilt lockout switch locks out the tilt function. See page 42.

Tip: When operating PTO driven attachments, the tilt lockout switch will automatically activate. Using

the attachment with the tilt locked out will limit the possibility of tilting the attachment while the PTO
shaft is turning and putting stress on the PTO driveline u-joints. Before engaging the PTO system,
tilt the attachment to the desired operating position. See your attachment owner’s manual for
detailed information.

Front Auxiliary Hydraulic Switch

The front auxiliary hydraulic switch controls hydraulic flow to the front male and female

coupler for attachment operation. See page 43.

Joystick

RPM

Control

Lever

PTO

Front Auxiliary

Hydraulic Switch

Tilt Lockout Switch

Joystick Lockout Switch

Advertising
This manual is related to the following products: