11 setting i/o data, Channel number, Input data – Yaskawa MP940 User Manual
Page 135
MP940 Functions
4.4.11 Setting I/O Data
4-42
4.4.11 Setting I/O Data
Click the
I/O Data Settings
Tab.
Channel Number
The channel number is always displayed as CH#1.
Input Data
• Operating Status (IW0002)
The status of each bit in the operation status register is displayed as either ON
or
OFF
. The leading input register is the status word.
Bit No.
Status Name
Meaning
0
Data Setting Error
ON: Data setting error has occurred.
1
Fix Parameter Setting Error
ON: Fixed parameter setting error has occurred.
2
Count Value Preset
ON: Count has been preset.
3
PI Latch Detected
ON: PI latch has been completed.
4
A/B Pulse 0
ON: Feedback pulse is ±1 max.
5
Coincident Detection Signal
ON: Coincidence detection signal is ON (Unit:
pulse)
6 to 8
Not used
---
9
Writing Fix Parameter Now
ON: Writing online parameters
10
A-pulse Disconnect Indication ON: Pulse disconnected
11
B-pulse Disconnect Indication ON: Pulse disconnected
12 to 14
Not used
15
Module Ready
ON: Counter Module ready