Input/output device settings, Windows xp users – Edirol PC-80 User Manual

Page 100

Advertising
background image

100

PC-80 driver settings

If you are using the PC-80 with software (such as Media Player) that uses the
standard device settings of the operating system, use the following procedure
to choose the input/output device.
The method for making device settings will depend on the software you’re
using. For details, refer to the owner’s manual of your software.

1

Use the USB cable to connect the PC-80 to your computer.

2

Turn on the PC-80’s power switch.

3

Open the

Sounds and Audio Devices Properties

dialog box.

1.

Click the Windows

start

menu, and from the menu that appears, select

Control Panel

.

2.

In

“Pick a category,”

click

“Sound, Speech, and Audio Devices.”

3.

Next, in

“or pick a Control Panel icon,”

click the

Sounds and Audio

Devices

icon.

4

Click the

Audio

tab.

fig.XP-E

5

In each of the

Sound playback

,

Sound recording

, and

MIDI music

playback

areas, click the

Default

device

field and choose the following

devices from the list that appears.

* In

MIDI music playback

, choose one of the

three devices that appears. If you’re using Media
Player, choose

EDIROL PC-80 Player

.

* For more about each device, refer to

“MIDI

DEVICES”

(p. 99).

6

Close the

Sounds and Audio Devices Properties

dialog box.

Click

[OK]

to complete the settings.

Input/output device settings

Windows XP users

Sound playback

EDIROL PC-80

Sound recording

EDIROL PC-80

MIDI music
playback

EDIROL PC-80 MIDI
OUT
EDIROL PC-80 Synth
EDIROL PC-80 Player

In order to make device
settings, you must have
already installed the
driver.
(

“Installation and

settings (Windows)”

(p.

16))

Depending on your setup,
the System icon may
appear directly in the
Control Panel

(Classic

view). If so, double-click
the System icon.

Choose the device that’s
appropriate for your
system. You do not
necessarily have to choose
the devices shown at the
left.

If you’re using sequencer
software, you’ll need to
make audio and MIDI
device settings from
within your software. For
details, refer to the owner’s
manual of the software
you’re using.

PC-80_e.book 100 ページ 2005年11月10日 木曜日 午前11時34分

Advertising