Edirol PC-80 - Manual (Page 64)

64
Using the PC-80 as a MIDI controller keyboard
■
Transmitting a program change message
Here’s how to transmit a Program Change message on the current channel (p. 62).
fig.PC-1_75
Make sure that the PC-80’s SOFTWARE SYNTHESIZER button is not lit.
If you’re in Controller mode (p. 67), switch to Play mode.
fig.program
1
Press the PGM CHANGE button.
The PGM CHANGE button will light. The display will show the most recently
transmitted Program Change number.
2
Use the VALUE encoder to specify the Program Change number you want to transmit.
The Program Change message has been sent.
Range 1–128
PLAY
1 2
PC-80_e.book 64 ページ ２００５年１１月１０日 木曜日 午前１１時３４分