Edirol PC-80 - Manual (Page 103)

103
PC-80 driver settings
10
Specify a name for each new external device .
1. Click Show Info .
2. Enter a name in the Device
Name field. For each new
external device , enter the
following names.
11
Using your mouse, drag the ▼ and ▲ symbols that indicate the output and
input of the PC-80 icon and the new external device icons so that they are
connected as shown in the illustration below.
12
Click Test Setup .
The mouse cursor will change to a shape.
13
Try playing the keyboard of the PC-80.
If the
▲ in the diagram blinks, the settings are correct.
14
Click Test Setup once again to complete the check.
15
Close the Audio MIDI Setup dialog box.
First new
external device
Second new
external device
Third new
external device
Fourth new
external device
Device
Name
PC-80 Keyboard PC-80 Synth PC-80 Player
PC-80 MIDI
OUT
12,14
11
Click
blink 13
Drag with mouse
to connect
If the software you’re
using allows you to make
MIDI and audio input/
output settings, select the
PC-80. For details, refer to
the owner’s manual of the
software you’re using.
PC-80_e.book 103 ページ ２００５年１１月１０日 木曜日 午前１１時３４分