Edirol PC-80 - Manual (Page 98)

98
System settings for the PC-80
fig.util*
1
Simultaneously press the MIDI CH button and PGM CHANGE button,
and hold them down for a few moments.
The PC-80’s display will indicate “UTL,” and you will be in Utility mode.
fig.sy0
2
Press the [SYSTEM] key on the keyboard.
“SY0” appears (blinking) in the display.
3
Use the VALUE encoder or the [7] key of the keyboard to choose “ SY7 .”
fig.enter
4
Press the ENTER button.
* If you press any other button without pressing the ENTER button, the setting will be
cancelled.
5
Use the VALUE encoder or press the [0] or [1] key of the keyboard to specify
the USB MIDI Driver Mode.
The display will indicate either “ON” or “OFF.”
* FPT = Fast Processing Technology for MIDI Transmission:
Effective use is made of the USB bandwidth according to the amount of MIDI data to be transmitted,
ensuring that MIDI data processing will always occur optimally.
6
Press the ENTER button.
MIDI ADVANCED DRIVER ON/OFF
Key Setting Explanation
0 ADVANCED OFF
Standard driver mode
This mode uses the standard MIDI driver provided by the operating system.
You can use this mode without installing the dedicated driver.
You won’t be able to use the PC-80 software synthesizer.
1 ADVANCED ON
Advance mode
This mode uses a dedicated driver written specifically for the PC-80. By using
the dedicated driver, you can take advantage of *FPT technology for high-
speed MIDI transfer.
We recommend that you use this mode.
Key Setting
0 OFF
1 ON
PC-80_e.book 98 ページ ２００５年１１月１０日 木曜日 午前１１時３４分