Edirol PC-80 - Manual (Page 106)

106
PC-80 driver settings
■
Decreasing the ASIO buffer size
If you’re using the PC-80 with ASIO-compatible software, you can minimize the buffer size. If you
experience clicks or pops in the sound, clear the check mark from this check box.
1
As described in “Accessing the Settings dialog box of the EDIROL PC-80 Driver” (p. 104),
open the EDIROL PC-80 Driver Settings dialog box.
fig.driver-set1.eps
2
Place a check mark in the “Use Smaller ASIO Buffer
Size” check box.
3
Click [OK] to close the EDIROL PC-80 Driver
Settings dialog box.
fig.disable
4
Enable the PC-80 software synthesizer.
1. In the taskbar, right-click the PC-80 Software
Synthesizer icon .
2. From the menu that appears, choose Disable
Synth to clear the check mark.
3. A dialog box indicating “Enable the PC-80
Software Synthesizer” will appear.
Click [OK] .
* After you change a setting in the EDIROL PC-80 Driver Settings dialog box, you must restart any software
that uses the PC-80. If you are using software that has an audio device test function, please execute the test
function.
* The audio settings of some software also allow you to adjust the buffer size. For details, refer to the owner’s
manual of the software you’re using.
2
3
PC-80_e.book 106 ページ ２００５年１１月１０日 木曜日 午前１１時３４分