Edirol PC-80 - Manual (Page 110)

110
PC-80 driver settings
■
Adjusting the recording timing
If the timing of the recorded audio data seems off, adjust the timing value as follows.
1
As described in “Accessing the EDIROL PC-80 Driver Settings panel” (p. 107), open the
EDIROL PC-80 Driver Settings dialog box.
2
Adjust the “Recording Timing.”
Click ▲▼ to adjust the timing.
3
Enable the PC-80 software synthesizer.
1. Hold down the Control key and click the PC-80 Software
Synthesizer icon shown in the Dock.
2. From the menu that appears, choose Disable Synth to
clear the check mark.
3. A dialog box indicating “Enable the PC-80 Software
Synthesizer” will appear.
Click [OK] .
* After you change a setting in the EDIROL PC-80 Driver Settings dialog box, you must restart any software
that uses the PC-80. If you are using software that has an audio device test function, please execute the test
function.
PC-80_e.book 110 ページ ２００５年１１月１０日 木曜日 午前１１時３４分