Edirol PC-80 - Manual (Page 107)

107
PC-80 driver settings
The EDIROL PC-80 Driver Settings panel lets you change the buffer size of the driver, and
adjust the recording margin and timing.
■
Accessing the EDIROL PC-80 Driver Settings panel
1
Use a USB cable to connect the PC-80 to your Macintosh, and turn on the power switch of the
PC-80.
2
Close all software that uses the PC-80.
3
Disable the PC-80 software synthesizer.
1. Hold down the Control key and click the PC-80 Software
Synthesizer icon shown in the Dock.
2. From the menu that appears, choose Disable Synth .
3. A dialog box indicating “Disable the PC-80 Software
Synthesizer” will appear.
Click [OK] .
4
In the Mac OS System Preferences , click “EDIROL PC-80.”
5
The EDIROL PC-80 Driver Settings panel will appear.
Macintosh users
PC-80_e.book 107 ページ ２００５年１１月１０日 木曜日 午前１１時３４分