Edirol PC-80 - Manual (Page 121)

121
Troubleshooting
Is the PC-80 connected to your computer via USB?
The PC-80 software synthesizer cannot start up unless the PC-80 is connected to your computer. Connect the
PC-80 to the USB connector of your computer.
Is the PC-80 driver installed correctly?
Unless the PC-80 driver is installed correctly, the PC-80 will not be recognized correctly even if it is connected
to your computer, and you won’t be able to start up the PC-80 software synthesizer. Install the PC-80 driver,
and then reconnect the PC-80 to the USB connector of your computer.
(
➔ “Setup” (p. 15))
Are you logged in as the user who installed the PC-80 software synthesizer?
The PC-80 software synthesizer will not start up if you are logged in as a user other than the one who installed
the PC-80 software synthesizer. You can either log in again as the user who installed the software, or log in as
the user who will be using the software and then install the PC-80 software synthesizer.
Is the PC-80 software synthesizer installed?
The PC-80 software synthesizer will not start up unless it has been installed in your computer. Install the
software as directed.
Is the PC-80 software synthesizer disabled?
You won’t be able to start up the PC-80 software synthesizer if the Disable Synth item is selected in the PC-80
software synthesizer Settings menu. Open the Settings menu, and remove the check mark from Disable Synth.
Is the PC-80 Software Synthesizer icon running?
You won’t be able to start up the PC-80 software synthesizer if the PC-80 software synthesizer icon is not
running in the Taskbar (for Macintosh, in the Dock). Use the following procedure to start up the PC-80 software
synthesizer icon.
Windows users:
From the start menu, choose All Programs (in Windows 2000, Programs ) | EDIROL | PC-80 Software
Synthesizer | PC-80 Software Synthesizer .
Macintosh users:
In the Applications folder, double-click the PC-80 Software Synthesizer icon.
Is the PC-80 connected to the USB connector of your computer?
The PC-80 software synthesizer menu won’t be displayed correctly if the PC-80 is not connected to your
computer. Connect the PC-80 to the USB connector of your computer.
Restart the PC-80 software synthesizer.
From the PC-80 software synthesizer’s menu, choose Exit, and then use the following procedure to restart it.
Windows users:
From the start menu, choose All Programs (in Windows 2000, Programs ) | EDIROL | PC-80 Software
Synthesizer | PC-80 Software Synthesizer .
Macintosh users:
In the Applications folder, double-click the PC-80 Software Synthesizer icon.
Problems with the PC-80 Software Synthesizer
Won’t start up
The menu does not appear correctly (can’t select it)
PC-80_e.book 121 ページ ２００５年１１月１０日 木曜日 午前１１時３４分