Edirol PC-80 - Manual (Page 94)

94
System settings for the PC-80
fig.util*
1
Simultaneously press the MIDI CH button and PGM CHANGE button,
and hold them down for a few moments.
The PC-80’s display will indicate “UTL,” and you will be in Utility mode.
fig.sy0
2
Press the [SYSTEM] key on the keyboard.
“SY0” appears (blinking) in the display.
3
Use the VALUE encoder or the [4] key of the keyboard to choose “ SY4 .”
fig.enter
4
Press the ENTER button.
* If you press any other button without pressing the ENTER button, the setting will be
cancelled.
5
Use the VALUE encoder or press the [0] or [1] key of the keyboard to switch MIDI I/F Mode
on or off.
6
Press the ENTER button.
MIDI I/F MODE
Key Display Mode Explanation
0
MIDI I/F
MODE OFF
MIDI messages from your computer will not be sent from the PC-80’s MIDI
OUT connector. MIDI messages from the PC-80’s keyboard will be sent both to
your computer and to the PC-80’s MIDI OUT connector.
1
MIDI I/F
MODE ON
The PC-80’s MIDI OUT connector will act as a MIDI interface. MIDI messages
from the computer connected via USB to the PC-80 will be sent to the MIDI de-
vice that’s connected to the PC-80’s MIDI OUT connector.
MIDI OUT DEVICE
MIDI IN DEVICE
MIDI OUT
PC-80 PC USB
PC-80 MIDI OUT
PC-80 Keyboard PC-80 keyboard
PC-80 Synth
PC-80 software synthesizer
PC-80 Player
Synth for manual
performance
Synth for
SMF playback
MIDI IN DEVICE
MIDI OUT DEVICE
MIDI OUT
PC-80 PC USB
PC-80 MIDI OUT
PC-80 Keyboard PC-80 Keyboard
MIDI I/F MODE ON
PC-80 Synth
PC-80 Player
PC-80 software synthesizer
Synth for manual
performance
Synth for
SMF playback
PC-80_e.book 94 ページ ２００５年１１月１０日 木曜日 午前１１時３４分