Transmitting a bank select msb message, P. 66, Transmitting a bank select – Edirol PC-80 User Manual
Page 66: Msb message, P. 66) and
66
Using the PC-80 as a MIDI controller keyboard
■
Transmitting a bank select MSB message
Here’s how to transmit a
bank select MSB (#CC00) message
The
bank select LSB
and
program change message
you most recently transmitted
(specified) as described in “Transmitting a bank select LSB message” (p. 65) and “Transmitting
a program change message” (p. 64) will also be transmitted.
fig.BANK-1_75
fig.util*
1
Simultaneously hold the
[MIDI CH]
button and
[PGM CHANGE]
button down.
The display will indicate “UTL,” and the PC-80 enters UTILITY mode.
2
Press
[BANK MSB]
key.
fig.BANK-2
3
Use the
Value Encoder
or the
[0]
–
[9]
keys of the keyboard to specify the bank
select MSB that you want to transmit.
fig.enter
4
Press the
[ENTER]
button.
*The setting will be cancelled if you press another button instead of the
[ENTER]
button.
The
bank select MSB message
has now been transmitted.
2
1
4
3
*1 Reference
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or
mode of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the
currently set value, or will blink if the value is different.
PC-80_e.book 66 ページ ２００５年１１月１０日 木曜日 午前１１時３４分