Sample rate setting, P. 85)), P. 85 – Edirol PC-80 User Manual
Page 85
85
System settings for the PC-80
fig.audiosys-1
fig.util*
1
Simultaneously press the
MIDI CH
button and
PGM CHANGE
button,
and hold them down for a few moments.
The PC-80’s display will indicate “UTL,” and you will be in Utility mode.
fig.sy0
2
Press the
[AUDIO SYSTEM]
key on the keyboard.
“AS0” appears (blinking) in the display.
3
Use the
VALUE
encoder or the
[0]
key of the keyboard to choose “
AS0
.”
fig.enter
4
Press the
ENTER
button.
* If you press any other button without pressing the ENTER button, the setting will be
cancelled.
5
Use the
VALUE
encoder or the
[0]–[3]
keys of the keyboard to specify the sample rate for USB
audio.
6
Press the
ENTER
button.
* The Sample Rate setting will be applied the next time you turn on the power.
SAMPLE RATE SETTING
Key
Indication
Setting
0
44.1 kHz
1
48 kHz
2
96 kHz playback
3
96 kHz recording
2
1
4
3
PC-80_e.book 85 ページ ２００５年１１月１０日 木曜日 午前１１時３４分