MCZ Comfort Air SLIM - Manual (Page 10)

SLIM-BASIC COMFORT AIR KIT Chapter 3
USE AND MAINTENANCE MANUAL page
10
Basic comfort air kit Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
229*
14,5 100 100 14,5
53
53
30
6
1
91
**
220**
2
00
*
* MISURE FORO CARTONGESSO
** MISURE TAPPO IN CARTONGESSO
Min9-max15
2
00
*
 Prepare the holes to insert the fan kit - measuring 229 mm x
200 mm - on the wall at the desired height
 Insert the structure of the kit from the inside of the wall
towards the outside and secure it using the three screws at the
top and the 3 at the bottom; remember to do this before
completing the cladding.
 connect the electrical wires of the fan and secure them onto
the cable clamp inserted in the fan kit (to avoid the wires falling
into the cladding during fan replacement operations) and make
sure the wires do not touch the fan rotor
Air inlet pipe
connection
Kit fixing
holes
Kit fixing
holes
** PLASTERBOARD COVER SIZE
* PLASTERBOARD CUT-OUT SIZE
Min9-max15