MCZ Comfort Air SLIM User Manual
Page 15
SLIM-BASIC COMFORT AIR KIT
Chapter 3
USE AND MAINTENANCE MANUAL
page
15
Basic comfort air kit
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
2.2.3. INSTALLING THE HOT AIR OUTLET
Once you have installed the fan kit, make a hole in the wall measuring
160x185 in order to secure the hot air outlet support.
192
21
2
160
foro cartongesso
8
8
5
5
18
5
fo
ro
c
ar
to
ng
es
so
The hot air outlet support can be positioned so that the ducts lead from the top, from the bottom, from the left
or from the right for the FLIP and FLOAT models, whereas it can only lead from the left and right for GHOST
models. Depending on how you wish the ducting to the positioned, the tray and light can be fitted as illustrated
in the table below:
DUCTING
MODEL
TOP BOTTOM
RIGHT
LEFT
FLIP
Yes (no light-no tray)
Yes (no light-no tray)
Yes
Yes
FLOAT
Yes (no tray)
Yes (no tray)
yes
Yes
GHOST No
No yes
yes
WALL
FASTENING
HOLE
DUCTING
AT THE TOP
DUCTING
AT THE BOTTOM
DUCTING
ON THE LEFT
DUCTING
ON THE RIGHT
plasterboard hole
plasterboard hole