Min 1 cm – MCZ Hydrotherm 70 User Manual
Page 36
INSTALLATION AND USE MANUAL
Chapter 4
page
36
Installation and assembly
Technical service – MCZ GROUP S.p.A. all rights reserved - Reproduction prohibited
4.10. UNIT CLADDING
Only after finishing all the installation operations of
the fireplace stove, connecting the smoke duct,
electric and hydraulic connections and carrying out
the first lighting, is it possible to begin the cladding
of the unit
4.10.1. INSULATION OF FIREPLACE STOVE
The fireplace stove must also always be separated from nearby
walls and ceilings.
If necessary, use insulating materials to insulate the walls that are in
contact with the unit if they may be damaged or catch fire (walls made
of wood, plasterboard, etc.).
4.10.2. INSULATING A WOODEN BEAM
The wood beam must be protected with adequate insulation from
heated parts to prevent the risk of fire or damage of the cladding.
4.10.3. Decorative hood
Before building the decorative hood we strongly recommend a
general test of the fireplace stove in order to correct any
operating problems or possible leaks of smoke into the room.
We recommend making the hood liner in fire-resistant
plasterboard of a 15/20 mm. thickness, with a self-supporting
frame in galvanised profile so as not to put weight on the components
of the cladding (such as wooden beams and marble architraves) that do
not have a load-bearing structure and to make it easy to work in the
event of future anomalies and/or maintenance.
min 1 cm