Electrolux FOM 71 CLS - Manual (Page 61)

15:1
Installation of laboratory sensors
FOM 71 MP-Lab
Installation of laboratory sensors for temperature
and speed
Laboratory sensors can be attached to the FOM 71 MP-Lab model. Ho-
wever, it is important that the installation is executed in accordance with
the instructions below so as not to return improper operations or faulty test
results.
Installation of the laboratory temperature sensor.
A suitable place for an external temperature sensor can be found at the
side of the heating element box. Hole dimension is ½ “BSP. See picture
below.
Electrical installation must be carried out by an authorized personnel