RIGOL DP832A - Manual (Page 32)

RIGOL Chapter 1 Quick Start
1-14 DP800A User’s Guide
Table 1-1 DP800A rear panel explanation
No. Name Explanation
1 LAN Interface Connect to the local network via the RJ45 interface
2 USB DEVICE
Connect the instrument (as “slave” device) to
external USB device (such as PC)
3 USB HOST
Connect the instrument (as “host” device) to external
USB device (such as USB storage device);
extend a GPIB interface for the power supply using
the USB-GPIB interface converter (option)
4 Digital I/O Digital I/O interface
5 RS232 Interface Serial communication interface
6 Voltage Selector
Select the specification of the input voltage (100, 115
or 230; please refer to Table 1-2)
7 Power Socket AC power input interface
8 Fuse
The fuse specification is related to the instrument
model and the actual input voltage (please refer to
the “Input Power Requirements” at the rear panel or
Table 1-3)
9 Fan
10
Input Power
Requirements
Corresponding relations of the AC input power
frequency, voltage and fuse specification
11 Output Interface
Only DP811A provides this interface which has the
same function as that of the “Output Terminals” at
the front panel
Note: The “Output Terminals” at the front panel and the “Output Interface” at the
rear panel cannot output at the same time. Only one of the two ways can be selected
to output at any one time (the “Output Terminals” at the front panel has higher
accuracy).