RIGOL DP832A - Manual (Page 67)

Chapter 2 Front Panel Operations RIGOL
DP800A User’s Guide 2-13
To Track the On/Off Status of the Channel Output
Press Utility  System  Track Set  On/Off to select “Enable” or “Disable”.
 Disable: the output status of the other channel will not be affected when the
output of a channel is turned on or off.
 Enable: for channels (the channels should be of the same instrument) that
support the track function, the tracking status of the on/off status of the channel
output is related to the number of channels of which the track functions are
enabled.
 If only the track function of a single channel is enabled (please refer to “To
Enable the Track Function”), the output of the other channel will be
turned on or off at the same time when the output of this channel is turned
on or off. At this point, the output status of the channel of which the track
function is not enabled cannot be set and can only change with that of the
channel of which the track function is enabled.
 If the track functions of the two channels are both enabled (please refer to
“To Enable the Track Function”), the output of the other channel will be
turned on or off at the same time when the output of a channel is turned on
or off. At this point, the output status of both of the two channels can be
set.