TA Triumph-Adler P-C3570DN - Manual (Page 114)

Using the Operation Panel 4-41
Paper Settings
This sets the paper size and type for the MP tray and cassettes from
which paper is supplied.
The options available in Paper Settings are as follows:
• MP Tray Set. (MP tray settings)
• Cassette (1 to 5) Set. (Settings for the cassettes)
• Media Type Set. (Paper type settings)
• Reset Type Adj. (Resets customized settings)
1
Press [MENU].
2
Press  or  to select Paper Settings.
3
Press [OK]. The Paper Settings menu appears showing a list of
available options.
MP Tray Set. (MP tray settings)
To print correctly on paper supplied from the MP tray, use the procedure
below to set the paper size and media type.
Paper Size (Paper size setting for MP tray)
You can use this to set the paper size that can be supplied from the MP
tray. The default setting is Letter size for the U.S. and Canada and A4 for
other countries.
For more information about the paper sizes that you can feed from the MP
tray, refer to Paper Specifications on page 3-2.
1
In the Paper Settings menu, press  or  to select MP Tray Set..
2
Press [OK]. The MP Tray Set. menu screen appears.
3
Press  or  to select Paper Size.
Note Feeding the paper having a paper size which does not
match the current paper size from the MP tray can cause paper
jam.
Paper Settings: a b
1 MP Tray Set.
2 Cassette 1 Set.
3 Cassette 2 Set.
[ Exit ]
MP Tray Set.: a b
1 Paper Size
2 Media Type
[ Exit ]