TA Triumph-Adler P-C3570DN - Manual (Page 224)

Troubleshooting 6-9
The paper cassette matching the paper size and paper type of the print job is
empty. Load paper into the paper cassette as displayed in place of #. Press
[OK] to resume printing.
If you want to print from a different paper source, press [Alt.] ([Left Select]) and
you can change the source for paper feeding. After selecting a paper source
and pressing [MENU], Paper Settings appears. By pressing the , the
paper type settings menu appears. After setting the correct paper type, press
[OK] and printing starts.
There is no paper cassette installed in the printer that matches the paper size
and paper type of the print job. Set paper in the MP tray. Press [OK] to resume
printing. (Note that feeding the paper having a paper size which does not match
the current paper size from the MP tray can cause paper jam.)
If you want to print from a different paper source, press [Alt.] ([Left Select]) and
you can change the source for paper feeding. After selecting a paper source
and pressing [MENU], Paper Settings appears. By pressing the , the
paper type settings menu appears. After setting the correct paper type, press
[OK] and printing starts.
This message is displayed when Low was selected in Security Level.
The total amount of data received by the printer exceeds the printer’s internal
memory.
Try adding more memory. Press [OK] to resume printing. You can abandon
printing by pressing [Cancel].
If Auto Error Clear is set to On, printing will be automatically resumed after a
preset period of time.
Multi copies cannot be printed because RAM disk is disabled or the SSD is not
installed. Try adding more memory or installing SSD, and configuring the RAM
disk settings.
This message is displayed when the optional paper feeder PF-510 is not
connected to a power source and COATED (coated paper) is selected as the
paper type setting. Connect it to a power source via the printer.
Message Corrective Action
Load paper in
cassette #.
Load paper in
MP tray.
Low security
Memory is full.
Print job cannot be
processed completely.
No multi copies.
Press [OK].
Disconnect the power
cord from the machine
and connect it to the
multi purpose feeder.