Subaru Robin RGV12100 - Manual (Page 18)

15
(c) Operating the generator.
Turn the house AC breaker off before starting the generator.
Start the generator and warm it up.
Turn the house AC breaker on.
Do not start the generator with electrical appliance (s) connected and with their switch-
es on.
Otherwise the appliance (s) may be damaged by the surge voltage at starting.
CAUTION
4-2-12 3-PHASE APPLICATION (RGV13100T only)
Connection of Power Cables
Do not touch output terminals while the generator is running or the operator may suf-
fer severe electric shock resulting in death.
Be sure to shut down the generator before connecting or changing connection of
power cables to the generator.
WARNING
This generator has four output terminals of three phase, four wire system.
Connect power cables to the generator output terminals according to the type of application.