Subaru Robin RGV12100 - Manual (Page 35)

32
Tester (-)
Tester
( )
Pin No. 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 ! !00 ! !11 ! !22 ! !33
1 1 -------
2 2 -------
3 3 18.4M ------- 10M 10.2M 10.4M 11M 14.4M 5.3M
4 4 ------- 0.1
5 5 0.1 -------
6 6 -------
7 7 ------- 2675k
8 8 ------- 2590k
9 9 -------
! !00 5.3M 2392k 2389k 2438k 2664k 4M -------
! !11 18M 10.3M 10.2M 10.3M 11M 14M 5.3M -------
! !22 -------
! !33 -------
*Tester measuring range : 1000 k
8-11 IDLE CONTROL UNIT
(RGV12100 only)
Check the resistance between five terminals
of IDLE CONTROL UNIT with circuit tester.
4 5 3
1 2
NOTE : The resistance readings vary depending on the types of circuit testers.
The above table shows an example of the resistance readings measured by an ordi-
nary analogue circuit tester with 1.5 volt battery power source.
It is advisable for you to check the resistance readings using your standard circuit
tester and revise the checking table.
Terminal number of the IDLE CONTROL
UNIT
Circuit tester (with battery
power source 1.5 V)
Apply black needle of the circuit breaker
Apply red
needle of the cir-
cuit breaker
1 1 2 2 3 3 4 4 5 5
1 1 ------- 65 65 30
2 2 -------
3 3 65 ------- 65 30
4 4 65 65 ------- 30
5 5 6.5 6.5 6.5 -------