PLANET IPX-1980 - Manual (Page 34)

Reference Parameters and Explanation of Transfer:
Item Explanation
Blind Transfer Default is #, it can be defined in【Feature Codes】
Attended Transfer Default is *2, it can be defined in【Feature Codes】
Disconnect Call Default is *, it can be used after you use function key " *2 ".
it can be defined in【Feature Codes】
Timeout for answer on
attended transfer
Default is 15 seconds, it can be defined in【Feature Codes】
3.6.3 Conference
If you wanted to create a conference room for some extension users or with external lines,
you can input conference room number 900, input conference room password 1234
(Admin's password is 2345), then enter into conference room. This model supports 3
conference rooms. Please configure on this page【Conference】:
34