HP ScanJet Pro 2000 s1 - Manual (Page 49)

NOTE: HP recommends replacing the rollers every 100,000 scans.
Windows: The HP Scanner Tools Utility can provide a reminder when service is needed, which depends on
many conditions and might be sooner than this replacement interval.
NOTE: The roller replacement kit is a consumable and is not covered under warranty or standard service
agreements.
Replace the pickup roller module
To replace the roller module, follow these steps:
1. Press the Power button to turn off the scanner, and then disconnect the USB cable and power supply
from the scanner.
2. Pull forward on the latch to open the document feeder hatch.
3. Release the pickup roller cover tab.
ENWW Replace parts 41