Yamaha PSR-S670 - Manual (Page 34)

34 PSR-S670 Owner’s Manual
3
Play the keyboard.
The Voices can be played via three keyboard parts: LEFT, RIGHT 1 and 2. You can combine these parts by using
the PART ON/OFF buttons to create luscious instrument textures and convenient performance combinations.
• To play one single Voice on the entire keyboard:
Turn on the RIGHT 1 or 2 part.
• To play two different Voices in layer on the entire keyboard (Layer):
Turn on the RIGHT 1 and 2 parts.
• To play different Voices in the right- and left-hand sections of the key-
board (Split):
Turn on the LEFT and RIGHT (1 and/or 2) parts. The F
#2 and lower keys are used
for the LEFT part while the upper keys (excluding F #2) are used for the RIGHT 1
and 2 parts. The key which divides the keyboard into the left-hand and right-hand
sections is referred to as the “Split Point.”
1
Turn on the PART SELECT button corresponding to the part you
want to use.
To listen to the demo phrases for each Voice
Press the [7 ] (DEMO) button to start the Demo for the selected Voice. To stop the demo, press the [7 ]
button again.
NOTE
Make sure that MENU 1 is shown at the bottom right corner of the display (page 24).
NOTE
The Voice name for each part can be
confirmed on the Main display
(page 18).
Selecting Voices for the Parts
RIGHT 2 part
RIGHT 1 part
LEFT part
For selecting the keyboard part to change the Voice
For turning on/off the keyboard parts
Right-hand (UPPER) section Left-hand (LOWER) section
Split Point (F #2 by default)
NOTE
The Split Point can be changed
(page 55).
4
NEXT PAGE