Sony VCT-SGR1 Shooting Grip - Manual (Page 30)

Recording Preparations and Operations 30
Ch
apt
er 4
Re
c
o
rdin
g and Pl
a
y
bac
k
Before recording, make the following
preparations.
Recording preparations
Configure the other related menu settings as
necessary.
Use the AUDIO Setup menu to make settings
related to audio signals.
Press the AUDIO button to display the AUDIO
Setup menu.
To select the audio signals to record
Select the audio signal to record for each track.
1
Display the AUDIO Setup menu and
then
1 select and confirm “INPUT
SEL” t 2 select and confirm the track
(TRACK1 to TRACK16) t 3 select
and confirm the signal to record.
ANA1 to ANA2: Analog signals input via
the AUDIO INPUT CH-1 and CH-2
connectors.
OFF: Does not record a signal (silence).
Chapter
4 Recording and Playback
Recording Preparations
and Operations
Preparation Operation Reference
Set the date and
time for the unit. OTHERS >SET
DATE in the
SYSTEM Setup
menu page 29
Select the format
signals to record. SIGNAL
FORMAT in the
SYSTEM Setup
menu page 27
Select the audio
signals to record. INPUT SEL in the
AUDIO Setup
menu page 30
Set the audio
signals to monitor. PHONE SEL in
the AUDIO Setup
menu page 31
Set the display
range of the audio
level meters. METER TYPE in
the AUDIO Setup
menu page 31
Set the recording
levels. REC LEVEL in
the AUDIO Setup
menu page 32
Adjust the levels
of audio signals
output via the
EARPHONES
jack. Rotate the LEVEL
knob of the
EARPHONES
jack. page 10
Cancel record
inhibit if the
system is set to
record inhibit
mode. REC INHI in the
SYSTEM Setup
menu page 34
Select the time
data to display. TIMER SEL in
the TC Setup
menu page 32
Set time code
generator
operation in
accordance with
the time code and
user bits to record. RUN MODE, and
TCG MODE in
the TC Setup
menu page 33
Setting the Audio Signals
Preparation Operation Reference
INPUT Select
TRACK1
TRACK2
TRACK3 OFF
OFF
TRACK4 OFF
OFF
A U D I O S e t u p
INPUT SEL
PHONE SEL
MIX MODE
REC LEVEL
PB LEVEL
RMS
PEAK
ON
INPUT DELAY
METER TYPE
PEAK HOLD
BEEP(PHONE)
0
SR-R4:CAM TCR 00:00:00:00 S T O P
1 INPUT SEL
2 Track
3 Signal to record