Sony VCT-SGR1 Shooting Grip - Manual (Page 40)

TC Setup Menu 40
Chap
te
r 5
Men
u
Det
a
ils
• The settings displayed in bold are the factory default settings.
• The settings enclosed in [] are the settings as displayed in the settings windows.
Chapter
5 Menu Details
TC Setup Menu
Setting Item Settings
TIMER SEL Selects the type of time data to display on the display.
TC [Time Code]: Displays the time code: Displays the
time code.
UBIT [User Bit]: Displays the user bits.
TM1 [TIMER1]: Displays the file playback position in
Hours:Minutes:Seconds:Frames format.
TM2 [TIMER2]: Displays the playback position in
Hours:Minutes:Seconds:Frames format and treats the
beginning of the file as 0.
• TIMER RESET/PRESET are not available.
TIMER RESET Resets the internal time code generator, and the time data
becomes “00:00:00:00” (time code) or “00 00 00 00”
(user bits).
Notes
• The values read by the time code reader cannot be reset.
• Time data cannot be reset when the time code generator
is locked to external time codes or to values read by the
time code reader.
TIMER PRESET Selects the type of time data to preset to an arbitrary
value.
TCG TC: Time code generated by the time code generator
TCG UBIT: User bits generated by the time code
generator
TM1: TM1 signal count value
TCR SEL Selects the type of playback time code/user bits.
LTC [LTC]: Reads the LTC.
VITC [VITC]: Reads the VITC.
TCG MODE Selects the time code to which the internal time code
generator synchronizes.
PRST [Preset]: Allows you to use the “TIMER
PRESET” setting item to preset the initial value of the
time code generated by the internal time code
generator.
RGN [Regen]: Synchronizes the time code generator to
the time code value input via the TC IN connector
(regenerate).