Sony VPLL-3024 Fixed Short Throw Lens (2.34:1 to 3.19:1) - Manual (Page 117)

Help Guide
Linear PCM Recorder
PCM-A10
Establishing a Bluetooth connection with the one-touch operation (NFC connection)
If a smartphone has the NFC function, follow the steps below to establish a Bluetooth connection between the
smartphone and your linear PCM recorder.
When the operation screen of REC Remote appears on the smartphone, the Bluetooth connection should be
successfully established.
Proceed to
Using the smartphone for linear PCM recorder operations .
Hint
During a pairing attempt, [Bluetooth pairing request] may appear in [Notifications] on the smartphone. View the [Notifications] list
and tap [Bluetooth pairing request] and then select [Pair].
If the Bluetooth connection is not established, try the following:
Keep the smartphone touched on the mark on your linear PCM recorder and slowly move the smartphone back and forth
and around.
If the smartphone is in a smartphone case, remove the case and perform the above steps all over again.
Check if the NFC function of your linear PCM recorder is turned on. Select [
Bluetooth] - [NFC Settings] from the HOME
menu and make sure that [ON] is selected.
If neither of the above works, try the steps in
Establishing a Bluetooth connection between the smartphone and the linear PCM
recorder .
What is NFC?
NFC (Near Field Communication) is a technology that enables short-range wireless communications between various
devices, including mobile telephones and IC tags. You can exchange data by simply putting a device onto the designated
area on another device.
With an NFC-enabled smartphone, you can simply put it onto the
mark on the linear PCM recorder to establish a
Bluetooth connection by pairing both devices with the NFC function. You can also disconnect or switch the Bluetooth
Turn on your linear PCM recorder. 1
On the smartphone, turn on the NFC function. 2
Start REC Remote. 3
Put the smartphone onto your linear PCM recorder aligning the marks on both devices with each other.
Keep the smartphone on the linear PCM recorder until the [Bluetooth pairing request] screen appears on the
smartphone, and then select [Pair].
4
117