Sony X85K 50" 4K HDR Smart LED TV - Manual (Page 45)

45
Detailed Menu Description
C
h
a
p
te
r 5
M
e
nu
It
em
s
ALT/ [F5] TC2 SEL Sets whether to use two lines for the time code display section and selects the time
code type for 2nd line when the screen is one-port display.
For input ports:
Off
TCG
TM1
TM2
UBG
For output ports:
Off
LTC
VITC
TM1
TM2
UBR
UBV
I/O
ALT/ [F7] CHAR SET Sets the time code and other character information to superimpose on the signal
output from the MONITOR connector of SD/HD SDI.
(see page 29)
Out
[F1] POSITION Allows you to set the display position of character information with the cursor
buttons. Out
[F2] SIZE Sets the display size of character information.
Small
Medium
Out
[F3] INFO SEL Sets the character information content for when ALT/ [F10] (CHAR ON) is set to On.
Time (Timedata Only): Timer counter display information only
T&V (Timedata & VITC): Timer counter display information and VITC
T&T1 (Timedata & TM1): Timer counter display information and TM1
T&T2 (Timedata & TM2): Timer counter display information and TM2
T&UB (Timedata & UBIT): Timer counter display information and user bits
T&sta (Timedata & Status): Timer counter display information and operation status
Out
[F4] TYPE Sets the background of character information.
Outl (Outline): White characters with black outlines
Trnsl (Translucent): White characters on a gray screen background
Wo/BG (Without BG): White characters with no background
W/BG (With BG): White characters on a black background
Out
[F6] WARNING Sets whether to display a flashing warning message on the second line when an
item other than “Time” is selected with
[F3] (INFO SEL).
Off
On
Unit
[F10] EXIT Redisplays the previous menu. –
ALT/ [F9] META SET Sets uncompressed metadata. I/O
[F1] LINE1 Sets from which lines to acquire the uncompressed metadata.
In 1080 59.94i, 1080 50i, 23.98P/24P mode:
9H to 16H or 18H to 20H
In 720 59.94i/59.94P/29.97P, 720 50i/25P mode:
9H to 16H or 18H to 25H
In
[F2] LINE2
[F3] LINE3
[F10] EXIT Redisplays the previous menu. –
ALT/
[F10]
CHAR ON Sets whether to superimpose the characters representing the time data and
operation status on the signal output from the SD/HD SDI MONITOR connector.
(see page 29)
Off
On
Out
Button Indication Setting Target