Video menu – Sony X85K 50" 4K HDR Smart LED TV User Manual
Page 46
46
Detailed Menu Description
C
h
a
p
te
r 5
M
e
nu
It
em
s
VIDEO Menu
The VIDEO menu allows you to adjust video signals.
Button
Indication
Setting
Target
[F1]
MASTER
Simultaneously adjusts the Y, PB, and PR levels of the HD video signal output via
the SD/HD SDI OUT connectors.
0.0 to 100% (4000H) to 141.3% (5A70H)
Out
[F2]
Y
Adjusts the Y level of the HD video signal output via the SD/HD SDI OUT
connectors.
0.0 to 100% (4000H) to 141.3% (5A70H)
Out
[F3]
PB
Adjusts the Pb level of the HD video signal output via the SD/HD SDI OUT
connectors.
0.0 to 100% (4000H) to 141.3% (5A70H)
Out
[F4]
PR
Adjusts the Pr level of the HD video signal output via the SD/HD SDI OUT
connectors.
0.0 to 100% (4000H) to 141.3% (5A70H)
Out
[F5]
SETUP
Adjusts the setup level of the HD video signal output via the SD/HD SDI OUT
connectors.
–10% to 0.0% to 10.0%
Out
[F6]
BLK LV
Adjusts the black level of the HD video signal output via the SD/HD SDI OUT
connectors.
–31.0% to 0% to 31.0%
Out
[F7]
CRM PH
Adjusts the chroma phase of the HD video signal output via the SD/HD SDI OUT
connectors.
–127 to 0 to 127
Out
[F8]
SYNC PHASE
Adjusts the sync phase of the HD video signal output via the SD/HD SDI OUT
connectors.
Out
[F8]
SYNC
Roughly adjusts the sync phase.
–128 to 0 to 127
Out
[F9]
FINE
Finely adjusts the sync phase.
0 to 1024
Out
[F10]
EXIT
Redisplays the previous menu.
–
[F10]
INT SG
Sets the type of signal output from the internal signal generator.
Off
CB100
CB75
SMPTE
ARIB
MB1
MB2
10STEP
PBAR
RAMP
Black
In
ALT/
[F1]
OUT BLNK
Turns on or off vertical interval blanking processing of the HD video signals output
via the SD/HD SDI OUT connectors.
Through:
Does not perform blanking processing.
Blank:
Performs blanking processing.
Out
ALT/
[F3]
YADD
Sets whether to forcibly turn off Y add.
Auto
Off
Out
ALT/
[F5]
A/B DISP
Sets whether to display the video for the left or right when displaying 3D video
signals on the display.
Link-A
Link-B
MONI:
(Only available for the output ports)
I/O
ALT/
[F6]
VPID SEL
Selects VPID to be multiplexed with the HD SDI output in 3D mode.
Dual:
Uses as two separate sets of signals.
3D:
Uses as 3D signals.
Out