Eclipse - Fujitsu Ten CD7200 MKII - Manual (Page 40)

40
Operation
ATTENTION
If you do not want to cancel the connection,
press the [RTN/BAND] button. The BT Audio
Set selection mode is activated again.
The main unit is now disconnected
from the portable device.
( and disappear from the display.
However, will not disappear while
Blutooth hands-free is connected.)
Displaying device information for
the main unit
The name of the device (main unit), the
passcode and the BD ADD (device address)
can be displayed.
The name of the device and the
passcode are displayed.
ATTENTION
Each time the [SCREEN/TEXT] button is
pressed, the display changes in the following
way.
Device name / passcode
↔ Device name / BD
ADD (device address)
The BT Audio Set selection mode is
activated again.
4
When the disconnection has been
completed, the "COMPLETED"
message appears on the display.
1
Press the [SELECT] (Up/Down)
button while in the BT Audio Set
selection mode to select Device
INFO.
2
Press the [ENTER] button.
3
Press the [RTN/BAND] button.