Eclipse - Fujitsu Ten CD7200 MKII - Manual (Page 81)

Making changes with Display Adjustment Mode
81
XIII
Changing display type
(DISP Type)
You can change the display type (Background or
Spectrum analyzer).
The display type setting mode is
activated.
When the button is pressed, the
setting item changes in the following
order.
Background ↔ S/A ↔ Background ↔ www
Switches among the adjustments
modes.
Changing Background
(Background)
The background setting mode is
activated.
When the button is pressed, the
background changes in the following
order.
Motion picture1 ↔ Motion picture2 ↔
Motion picture1 ↔www
The selected settings will take effect.
Changing spectrum analyzer
(S/A)
You can change the spectrum analyzer type.
The spectrum analyzer type setting
mode is activated.
When the button is pressed, the
analyzer type changes in the following
order.
Type 1 ↔ Type 2
The selected settings will take effect.
1
Press the [SELECT] (Up/Down)
button to select DISP Type.
2 Press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to select a setting item.
4 Press the [ENTER] button.
1
Press the [SELECT] (Up/Down)
button to select Background.
2 Press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to select a setting item.
4 Press the [ENTER] button.
1
Press the [SELECT] (Up/Down)
button to select S/A (Sensitivity).
2 Press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to select a setting item.
4 Press the [ENTER] button.