Eclipse - Fujitsu Ten CD7200 MKII - Manual (Page 46)

46
Operation
How to use the remote control
Operation
Precautions in use of the remote control
• Be careful when handling the control, especially because it is small and light. Dropping or striking it
hard may damage it, wear out the battery or cause a malfunction.
• Keep the remote control free of moisture, dust and water. Do not subject it to shock.
• Do not place the remote control unit in places where it could be exposed to high temperatures, such
as on the dashboard or near a heater vent. Allowing the remote control unit to overheat may warp its
case or cause other problems.
• Do not operate the remote control unit while driving because doing so could cause an accident.
• When using the remote control, point it toward the remote control light receptor.
• The light receptor may not operate correctly if it is exposed to bright light such as direct sunlight.
• Remove the batteries from the remote control unit whenever it is not to be used for a long time.
Cleaning the remote control
• Use a dry cloth to keep the remote control clean. If the remote control unit gets extremely dirty, clean
it with a cloth lightly moistened with diluted liquid detergent.
• In no event should alcohol, benzine or thinner be used. These substances will damage the case or
finish.
Remote control
(RMC-105)
No. Button Name/Working
a
[PWR] button
Turns main unit power ON/
OFF.
b
[TU] button
Switches to the tuner mode.
c
[BAND] button
Switches radio band.
d
[ , ] button
Decreases audio volume
(including hands free mode).
e
[MUTE] button
Activates and deactivates
mute.