Eclipse - Fujitsu Ten CD7200 MKII - Manual (Page 98)

98
About the optional unit
Preset channel scan
This function enables the reception of all the
channels in the preset buttons for five seconds
each.
[P SCAN] will appear on the display,
and channels set in preset buttons [1]
through [6] will be received for five
seconds each.
The main unit will stay tuned to the
desired channel.
Switching displays when using
the XM satellite radio
Each time the button is pressed the
display item changes in the following
order:
channel name
→ category name → title
→ name → channel name → www
ATTENTION
If there are no names, the “NO DATA”
message will appear.
Displaying the XM ID
Displays the XM ID. The XM ID is necessary
when subscribing to programs, etc.
The Menu selection mode is activated.
The XM ID is displayed.
1
Press the [SELECT] (Down) button
for more than one second.
2
To stop the preset scan mode at
the desired channel, press the
[SELECT] (Down) button again.
1
Press the [SCREEN/TEXT] button
for more than one second.
1
Press the [ /MENU] button for
more than one second.
2
Press the [SELECT] (Up/Down)
button to select FUNC, and then
press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to select XM ID.
4 Press the [ENTER] button.