Post-flight checklist, Maintenance instructions – DJI Mavic 3 Pro Drone with Fly More Combo & RC User Manual

Page 107

Advertising
background image

DJI Mavic 3

Pro User Manual

©

2023 DJI All Rights Reserved.   

107

Post-Flight Checklist

• Make sure to perform a visual inspection so that the aircraft, remote controller, gimbal

camera, Intelligent Flight Batteries, and propellers are in good condition. Contact DJI support
if any damage is noticed.

• Make sure that the camera lens and vision system sensors are clean.
• Make sure to store aircraft correctly before transporting it.

Maintenance Instructions

To avoid serious injury to children and animals, observe the following rule:
1. Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of

reach of children and animals.

2. Store the Intelligent Flight Battery and remote controller in a cool, dry place away from

direct sunlight to ensure the built-in LiPo battery does NOT overheat. Recommended
storage temperature: between 22° and 28° C (71° and 82° F) for storage periods of more
than three months. Never store in environments outside the temperature range of 14° to
113° F (-10° to 45° C).

3. DO NOT allow the camera to come into contact with or become immersed in water or

other liquids. If it gets wet, wipe dry with a soft, absorbent cloth. Turning on an aircraft that
has fallen in water may cause permanent component damage. DO NOT use substances
containing alcohol, benzene, thinners, or other flammable substances to clean or maintain
the camera. DO NOT store the camera in humid or dusty areas.

4. DO NOT connect this product to any USB interface older than version 3.0. DO NOT connect

this product to any “power USB” or similar devices.

5. Check every aircraft part after any crash or serious impact. If there are any problems or

questions, contact a DJI authorized dealer.

6. Regularly check the Battery Level Indicators to see the current battery level and overall

battery life. The battery is rated for 200 cycles. It is not recommended to continue use
afterward.

7. Make sure to transport the aircraft with the arms folded when powered off.
8. Make sure to transport the remote controller with antennas folded when powered off.
9. The battery will enter sleep mode after long-term storage. Charge the battery to exit from

sleep mode.

10. Use the ND filter if the exposure time needs to prolonged. Refer to the product information

on how to install the ND filters.

11. Store and transport the aircraft, remote controller, battery, and charger in a dry

environment. It is recommended to store and transport the product in an environment with
an ambient temperature of 15° to 25° C and a humidity of about 40%.

12. Remove the battery before servicing the aircraft (e.g., cleaning or attaching and detaching

the propellers). Make sure that the aircraft and the propellers are clean by removing any
dirt or dust with a soft cloth. Do not clean the aircraft with a wet cloth or use a cleanser that

Advertising