DJI Mavic 3 Pro Drone with Fly More Combo & RC User Manual

Page 89

Advertising
background image

DJI Mavic 3

Pro User Manual

©

2023 DJI All Rights Reserved.   

89

7. Settings

:

tap to view or set parameters for safety, control, camera, and transmission. Refer to

the Settings section for more information.

8. Shooting Modes

Photo: Single, Explore, AEB, Burst Shooting, and Time Shot.
Video: Normal, Night, Explore, and Slow Motion.
MasterShots: drag-select a subject. The aircraft will record while executing
different maneuvers in sequence and keep the subject in the center of the frame.
A short cinematic video will be generated afterward.
QuickShots: Dronie, Rocket, Circle, Helix, Boomerang, and Asteroid.

Hyperlapse: Free, Circle, Course Lock, and Waypoints.
Pano: Sphere, 180°, Wide Angle, and Vertical. The aircraft will automatically
take several photos and synthesize a panoramic photo based on the selected
panoramic photo type.

• Explore mode uses the tele and medium tele cameras of Mavic 3 Pro as a safer way

to explore views from farther distances. In Explore mode, users can use the hybrid
zoom in any of the following ways:
a. Tap the zoom button and switch between a series of zooms, including 1x, 3x, 7x,

14x, and 28x.

b. Tap and hold the zoom button and drag up and down to adjust camera zoom.
c. Use two fingers on the screen to zoom in or out.
d. Use the camera control dial of the remote controller to zoom in or out.

• Night mode provides better noise reduction and cleaner footage, supports up to

12800 ISO.

• Night mode currently supports 4K 24/25/30fps.
• Obstacle sensing will be disabled in Night mode. Fly with caution.
• Night mode will be exited automatically when RTH or landing is started.
• During RTH or auto landing, Night mode is not available.
• FocusTrack is not supported in Night mode.

9. Camera Switch/Focus Button

Tap

7

to switch to the tele camera, and tap to switch to the medium tele camera. Tap

x

to switch to the Hasslebald camera.
Press and hold the camera button to bring up the zoom bar and adjust the digital zoom.

• Digital zoom is only supported in Normal video and Explore mode.

• When zooming in or out, the larger the zoom ratio, the slower the aircraft will

rotate, to achieve a smooth view.

AF/MF

: tap to switch between AF and MF. Press and hold the icon to display the focus bar.

Advertising