DJI Mavic 3 Pro Drone with Fly More Combo & RC - Manual (Page 58)

DJI Mavic 3 Pro User Manual
58
© 2023 DJI All Rights Reserved.
• DO NOT charge an Intelligent Flight Battery immediately after flight as it may be too hot.
Wait for the battery to cool down to the operating temperature before charging again.
• The charger stops charging the battery if the battery cell temperature is not within the
operating range of 5° to 40° C (41° to 104° F). The ideal charging temperature is from
22° to 28° C (71.6° to 82.4° F).
• Fully charge the battery at least once every three months to maintain battery health.
• For safety purposes, keep the batteries at a low power level in transit. Before
transportation, it is recommended to discharge the batteries to 30% or lower.
The table below shows the battery level during charging.
LED1 LED2 LED3 LED4 Battery Level
0%-50%
51%-75%
76%-99%
100%
Using the Charging Hub
DJI Mavic 3 Series 100W Battery Charging Hub is designed for use with Mavic 3 Intelligent
Flight Batteries. When used with the DJI 100W USB-C Power Adapter, it can charge up to three
Intelligent Flight Batteries in sequence from high to low power level. The charging time for one
battery is approximately 1 hour and 10 minutes.
How to Charge
1. Insert the Intelligent Flight Battery into the battery port. Connect the charging hub to a
power outlet (100-240 V, 50-60 Hz) using the DJI 100W USB-C Power Adapter.
2. The Intelligent Flight Battery with the highest power level will be charged first, and then the rest
will be charged in sequence according to their power levels. Refer to the Status LED Indicator
Descriptions for more information about the blinking patterns of the status LED indicator.
3. The Intelligent Flight Battery can be disconnected from the charging hub when charging is
complete.