DJI Mavic 3 Pro Drone with Fly More Combo & RC - Manual (Page 47)

DJI Mavic 3 Pro User Manual
© 2023 DJI All Rights Reserved.
47
• When the remote controller signal is normal during Advanced RTH, the pitch stick
can be used to control the flight speed, but the orientation and altitude cannot be
controlled and the aircraft cannot be flown left or right. Acceleration uses more power.
The aircraft cannot sense obstacles if the flight speed exceeds the effective sensing
speed. The aircraft will brake and hover in place and exit from RTH if the pitch stick is
pulled all the way down. The aircraft can be controlled after the pitch stick is released.
• If the home point is in the Altitude Zones while the aircraft is outside, the advanced
RTH will fly the aircraft below the altitude limit, which may be lower than the set RTH
altitude. Fly with caution.
• When the remote controller signal is normal during Straight Line RTH, the flight speed
and altitude can be controlled using the remote controller, but the orientation of the
aircraft cannot be controlled and the aircraft cannot be flown left or right. The aircraft
cannot sense obstacles if the pitch stick is used to accelerate and the flight speed
exceeds the effective sensing speed. When the aircraft is ascending or flying forward,
push the control stick in the opposite direction to exit RTH. Release the control stick to
regain control of the aircraft.
• If the aircraft reaches the max altitude while it is ascending during RTH, the aircraft
stops and returns to the Home Point at the current altitude.
• The aircraft will hover in place if it reaches the max altitude while it is ascending after
detecting obstacles in front of the aircraft.
Low Battery RTH
When the Intelligent Flight Battery level is too low and there is not enough power to return
home, land the aircraft as soon as possible.
To avoid unnecessary danger caused by insufficient power, the aircraft automatically calculates
if the battery power is sufficient to return to the Home Point according to the current position,
environment, and flight speed. A warning prompt will appear in DJI Fly when the battery level is
low and only enough to complete an RTH flight. The aircraft will automatically fly to the Home
Point if no action is taken after a 10-second countdown.
The user can cancel RTH by pressing the RTH button on the remote controller. A low battery
level warning will be prompted only once during a flight. If RTH is canceled following the
warning, the Intelligent Battery may not have enough power for the aircraft to land safely, which
may lead to the aircraft crashing or being lost.
The aircraft will land automatically if the current battery level can only support the aircraft long
enough to descend from its current altitude. Auto landing cannot be canceled, but the remote
controller can be used to alter the horizontal movement and the speed of descent of the aircraft
during landing. If there is sufficient power, the throttle stick can be used to make the aircraft
ascend at a speed of 1 m/s.
During auto landing, move the aircraft horizontally to find an appropriate place to land as soon
as possible. The aircraft will fall if the user keeps pushing the throttle stick upward until the
power is depleted.