DJI Mavic 3 Pro Drone with Fly More Combo & RC - Manual (Page 59)

DJI Mavic 3 Pro User Manual
© 2023 DJI All Rights Reserved.
59
Status LED Indicator Descriptions
Blinking Pattern Description
Solid yellow No battery is inserted.
Pulses green Charging
Solid green All batteries fully charged
Blinks yellow Temperature of batteries too low or too high (no further operation
needed)
Solid red Power supply or battery error (remove and reinsert the batteries or
unplug and plug in the charger)
• It is recommended to use a DJI 100W USB-C Power Adapter when using the charging
hub to charge Mavic 3 Intelligent Flight Batteries.
• The charging hub is only compatible with BWX260-5000-15.4 Intelligent Flight Batteries.
DO NOT attempt to use the charging hub with other battery models.
• Place the charging hub on a flat and stable surface when in use. Make sure the device is
properly insulated to prevent fire hazards.
• DO NOT attempt to touch the metal terminals on the battery ports.
• Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
Battery Protection Mechanisms
The battery level LEDs can display battery protection notifications triggered by abnormal
charging conditions.
Battery Protection Mechanisms
LED1 LED2 LED3 LED4 Blinking Pattern Status
LED2 blinks twice per second Overcurrent detected
LED2 blinks three times per
second
Short circuit detected
LED3 blinks twice per second Overcharge detected
LED3 blinks three times per
second
Over-voltage charger detected
LED4 blinks twice per second
Charging temperature is too
low
LED4 blinks three times per
second Charging temperature is too
high
If any of the battery protection mechanisms are activated, unplug the charger, and plug it in
again to resume charging. If the charging temperature is abnormal, wait for it to return to
normal. The battery will automatically resume charging without the need to unplug and plug
the charger again.