NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 212)

The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > LLDP > LLDP-MED > Local Device Information.
The Local Device Information page displays.
6. From the Interface menu, select an interface on which the transmission of LLDP-MED
frames is enabled.
7. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 52. LLDP-MED local device information
Description Field
Network Policy Information
Displays if a network policy TLV is present in LLDP-MED frames that are transmitted.
The application type, which can be one of the following:
• unknown
• voice signaling
• guest voice
• guest voice signaling
• soft phone voice
• videoconferencing
• streaming video
• video signaling
Each application type that is transmitted includes the VLAN ID, priority,
DSCP, tagged bit status, and unknown bit status. An interface can
receive one or many such application types.
This information is displayed only if a network policy TLV is transmitted.
Media Application Type
The VLAN ID that is transmitted. VLAN ID
The priority that is transmitted. Priority
The DSCP that is transmitted. DSCP
The unknown bit status that is transmitted. Unknown Bit Status
The tagged bit status that is transmitted. Tagged Bit Status
Main User Manual 212 Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual