Pressure Systems 9046 - Manual (Page 11)

Pressure Systems, Inc. Model 9046 User’s Manual
Page 5 www.PressureSystems.com
2.1 Equipment Required
The following items will be needed in order to set-up a Temperature Scanning Module:
• Model 9046 Temperature Scanning Module
• PSI powered network solution such as 90DB, 90DC, 98RK or 9FC. 9IFC will be used as
the example.
• PSI 9080 cable for the connection between the 9IFC and the Model 9046 module. See
Cable Connections.
• Ethernet compatible AAUI transceiver and Ethernet cables
• Personal computer (486 MHz or higher) equipped with:
- An Ethernet interface
- Windows ® 98, NT, 2000, or XP operating system
- PSI NUSS software
Note
NUSS software is included with each shipment. NUSS software
can also be downloaded from Pressure Systems’ website at
http://www.pressuresystems.com/netscanner_software.html .