Pressure Systems 9046 - Manual (Page 17)

Pressure Systems, Inc. Model 9046 User’s Manual
Page 11 www.PressureSystems.com
3. Connect to the module. (When a connection has been established, the top of the module
icon will turn yellow.) Follow these steps:
a. Left-Click on the module’s icon in the Node Map.
b. Right-Click on the module’s icon (in either the Node Map or the Description Box).
c. Click on “Connect” in the pulldown menu that appears.
Yellow
Figure 2-5: Network Status (after connection)
Note
If the module’s icon does not turn yellow, the module did not
connect.
Possible causes for a failure to connect are:
• There is an IP address incompatibility between the host computer and the module.
• There are two modules with the same address.