Hand Held Products 7200/UG - Manual (Page 18)

C H A P T E R 1 G E T T I N G S T A R T E D
18 18 18 18
Using Dolphin for the First Time
This section will show you how to:
1. Be sure that you’ve received all items included with your Dolphin order
2. Charge the battery
3. Turn the Dolphin on and off
4. Set the date and time
1 Checking Your Package
Inspect the package to see that the following standard items and accessories (if
ordered) are included:
•
Dolphin 7200 handheld computer/bar code scanner
•
Battery (1500 mAh, Nickel Metal Hydride (NiMH])
•
Dolphin 7200 Handheld Computer/HomeBase User’s Guide
•
Dolphin 7200 HomeBase
•
AC-DC Power Adapter for Dolphin HomeBase
•
Dolphin Operating System and Development System Software
2 Charging the Battery
CAUTION: Use only 3.6V battery packs provided by Hand Held Products.
The use of any other battery pack in the Dolphin terminal will void your
warranty and may result in damage to the Dolphin terminal or battery.
The terminal’s NiMH battery is shipped discharged of all power so you must charge it
before using for the first time. For maximum battery life, Hand Held Products
recommends that you deep cycle the battery twice before initial use. To deep cycle,
insert the battery into the HomeBase auxiliary battery well. Then, push and hold the
Service Aux Batt button for at least four seconds.
N O T E
Be sure to keep the
original carton and
packaging in the event
that the Dolphin
terminal or Dolphin
HomeBase™ should
need to be returned for
service.
N O T E
For maximum battery
life, Hand Held
Products recommends
that you deep-cycle
(service) the battery
twice before initial
use and then, once a
month thereafter.