Hand Held Products 7200/UG User Manual
Page 73
C H A P T E R 5 D O L P H I N 7 2 0 0 W I T H I M A G E - C A P T U R E
H A N D H E L D C O M P U T E R
73
73
73
73
Select this option to print the image shown in the program window.
Exit
Select this option to exit the program.
Dolphin Image-Capture Client Demonstration
Software
The Dolphin Image-Capture terminal is shipped loaded with client demonstration
software.
If the demonstration program has been removed from your terminal, follow these
steps to install:
1.
Check to make sure that HomeBase is set at 57600 baud rate on the PC.
2.
Click Windows Start button and go to Programs.
3.
Select the Dolphin Image Capture Program Group.
4.
Select Upload ICD Client Com 1 or Upload ICD Client Com 2.
5.
Place the Dolphin terminal in the HomeBase.
6.
On the Dolphin terminal, go to the DOS prompt and type YFF and press
ENTER to transfer the files.
7.
After successful transfer, type ICD and then press <ENTER>at the DOS
prompt.